| MOQ: | 1000 square meters |
| Price: | Negotiable |
| Standard Packaging: | Barrels |
| Delivery Period: | 15–30 Days Depending on Order Quantity |
| Payment Method: | T/T,L/C |
| Supply Capacity: | 20000sqm per week |
Connect the factory prepared elastic component with its site applied PU finish for the stadium project. UV exposure, colour choice, bonding and the supporting base are considered together so the material schedule describes the selected semi prefabricated construction.
UV / weathering evidenceSemi-prefabricated PUStadium base review
For sun-exposed stadiums, surface formulation, colour stability and maintenance matter as much as the base running-track system. Ask for the weathering method and results applicable to the exact colour and surface offered.
The semi-prefabricated concept uses a factory-prepared elastic layer together with on-site bonding and an approved PU surface finish. The final layer build-up, thickness and method statement must be confirmed for this specific SKU.
The existing listing specifies 13 mm and names concrete or asphalt foundations. These are starting inputs—not blanket approval to install over any existing surface. Check drainage, flatness, substrate strength and moisture.
Send Stadium DrawingsUSAWEGI supports the selection and supply of semi-prefabricated polyurethane stadium-track systems. A proposal can identify factory-prepared elastic components, on-site PU materials, consumables, line-marking needs and project coordination. Material-only supply, complete system supply and installation support are available under different service arrangements.
Semi-prefabricated PU, with factory-prepared elastic component and specified field-applied layers.
Review UV exposure, rainfall/drainage, ambient installation conditions and maintenance.
Request a bill of quantities, layer cross-section, TDS, packing details and method statement.
| Parameter | Proposed listing content / verification |
|---|---|
| Product | UV Resistant Polyurethane Semi Prefabricated Running Track Surface |
| Application | Stadiums, athletics facilities, outdoor tracks |
| Nominal thickness | 13 mm as currently listed; confirm total installed system thickness |
| Foundation | Concrete or asphalt, subject to suitability review |
| UV / weathering | Claim in current title; specific test method/result required |
| MOQ | 1,000 m² currently listed; reconfirm order requirements |
| Manufacturing origin | Guangdong, China in structured listing; confirm manufacturer/PO |
| Packing | Roll components and liquid materials may require different packaging; approved BOM governs |
| Certification | Only state product-specific approvals when supporting documents are provided |
Successful semi-prefabricated installation relies on inspection, substrate preparation, precise layer placement, controlled application and documented handover. A qualified team should issue the actual site-specific method statement.

Comparing per-square-metre prices is only meaningful when area, layer build-up, usage assumptions and included accessories are identical.
System-defined quantities, grades, packaging and export shipping terms.
Technical document coordination, cross-section, quantity schedule and drawing review.
Remote guidance or on-site installation support when agreed in writing.
To evaluate actual project/process imagery instead of relying solely on illustrative visual assets, open the company-published semi-prefabricated running track video and request additional product- and project-matched construction photos.
View USAWEGI Semi-Prefabricated Track Video →
For published customer cases, use only verifiable project photos with location, date, completed work and permission. Generated pictures are not actual reference projects.
No. This page covers a semi-prefabricated system. Request the cross-section showing factory-prepared and site-applied layers.
Potentially, but only after base-condition evaluation and approval of appropriate preparation, drainage and adhesion requirements.
Do not assume this from product naming or a generic company certificate. Request the exact product-system test documentation and identify whether a facility-level certification is needed.
Use the test method and results for the proposed semi-prefabricated construction when comparing its elastic response. Keep the layer arrangement and thickness with that report.
Material supply and technical coordination can be discussed; on-site services depend on project location, requirements and a written agreement.
A written lead time should be confirmed against system configuration, order quantity, production schedule and freight terms.
Send the project country, square metres, foundation drawings or photos, required tests, preferred finish, target construction date and supply and installation requirements. Request the correct semi-prefabricated PU build-up and an itemised BOM.

|
|
| MOQ: | 1000 square meters |
| Price: | Negotiable |
| Standard Packaging: | Barrels |
| Delivery Period: | 15–30 Days Depending on Order Quantity |
| Payment Method: | T/T,L/C |
| Supply Capacity: | 20000sqm per week |
Connect the factory prepared elastic component with its site applied PU finish for the stadium project. UV exposure, colour choice, bonding and the supporting base are considered together so the material schedule describes the selected semi prefabricated construction.
UV / weathering evidenceSemi-prefabricated PUStadium base review
For sun-exposed stadiums, surface formulation, colour stability and maintenance matter as much as the base running-track system. Ask for the weathering method and results applicable to the exact colour and surface offered.
The semi-prefabricated concept uses a factory-prepared elastic layer together with on-site bonding and an approved PU surface finish. The final layer build-up, thickness and method statement must be confirmed for this specific SKU.
The existing listing specifies 13 mm and names concrete or asphalt foundations. These are starting inputs—not blanket approval to install over any existing surface. Check drainage, flatness, substrate strength and moisture.
Send Stadium DrawingsUSAWEGI supports the selection and supply of semi-prefabricated polyurethane stadium-track systems. A proposal can identify factory-prepared elastic components, on-site PU materials, consumables, line-marking needs and project coordination. Material-only supply, complete system supply and installation support are available under different service arrangements.
Semi-prefabricated PU, with factory-prepared elastic component and specified field-applied layers.
Review UV exposure, rainfall/drainage, ambient installation conditions and maintenance.
Request a bill of quantities, layer cross-section, TDS, packing details and method statement.
| Parameter | Proposed listing content / verification |
|---|---|
| Product | UV Resistant Polyurethane Semi Prefabricated Running Track Surface |
| Application | Stadiums, athletics facilities, outdoor tracks |
| Nominal thickness | 13 mm as currently listed; confirm total installed system thickness |
| Foundation | Concrete or asphalt, subject to suitability review |
| UV / weathering | Claim in current title; specific test method/result required |
| MOQ | 1,000 m² currently listed; reconfirm order requirements |
| Manufacturing origin | Guangdong, China in structured listing; confirm manufacturer/PO |
| Packing | Roll components and liquid materials may require different packaging; approved BOM governs |
| Certification | Only state product-specific approvals when supporting documents are provided |
Successful semi-prefabricated installation relies on inspection, substrate preparation, precise layer placement, controlled application and documented handover. A qualified team should issue the actual site-specific method statement.

Comparing per-square-metre prices is only meaningful when area, layer build-up, usage assumptions and included accessories are identical.
System-defined quantities, grades, packaging and export shipping terms.
Technical document coordination, cross-section, quantity schedule and drawing review.
Remote guidance or on-site installation support when agreed in writing.
To evaluate actual project/process imagery instead of relying solely on illustrative visual assets, open the company-published semi-prefabricated running track video and request additional product- and project-matched construction photos.
View USAWEGI Semi-Prefabricated Track Video →
For published customer cases, use only verifiable project photos with location, date, completed work and permission. Generated pictures are not actual reference projects.
No. This page covers a semi-prefabricated system. Request the cross-section showing factory-prepared and site-applied layers.
Potentially, but only after base-condition evaluation and approval of appropriate preparation, drainage and adhesion requirements.
Do not assume this from product naming or a generic company certificate. Request the exact product-system test documentation and identify whether a facility-level certification is needed.
Use the test method and results for the proposed semi-prefabricated construction when comparing its elastic response. Keep the layer arrangement and thickness with that report.
Material supply and technical coordination can be discussed; on-site services depend on project location, requirements and a written agreement.
A written lead time should be confirmed against system configuration, order quantity, production schedule and freight terms.
Send the project country, square metres, foundation drawings or photos, required tests, preferred finish, target construction date and supply and installation requirements. Request the correct semi-prefabricated PU build-up and an itemised BOM.
